Woo Hoo...another fabulous "man" tool that can be used for sewing and crafting. I started Tool Time over 3 years ago and thought I might find a few things in different stores that can be used for something other than it's intended purpose. Never thought I would find 3 years worth...
Well, I found one more...a locking clamp. I found this in Harbor Freight Tools for $3.99. It's used to hold things securely and reach into tight places. Probably for clamping hoses on motors or something. We also have locking clamps in the dental office where I work. They are called hemostats...much smaller though. Hmmm...need to ask my boss if I can have one. Add to my collection. LOL!!
The handle is like a scissor handle, but has a ratcheting locking system that locks the tip to hold something.
Here's a picture of the tip or nose of the clamp.
This is a long one...12 inches. (pictured compared to a pen)
Now onto the "Sewing" transformation of this tool... TURNING A FABRIC TUBE.
When you sew a fabric tube for handles on bags or anything long and narrow, boy can it be a pain turning it right side out.
Just insert the clamp nose into the narrow fabric tube until you reach the end.
When you reach the end, open up the locking handle...
grab a little of the end fabric and lock the clamp.
Pull back on the "locked in" fabric and pull through the tube.
Tah Dah!!!
I am not kidding with this...it is fabulous!! Fastest turning for me...ever.
You really need to get one. I have no affiliation with Harbor Freight, but it is a great store. I'm sure you can find this online or in an automotive store if you don't have Harbor Freight. I'm so mad, the one Harbor Freight sells on their website has cute bright red handles :( Would have match my sewing room.
Happy Turning,
~Karen~
Well, I found one more...a locking clamp. I found this in Harbor Freight Tools for $3.99. It's used to hold things securely and reach into tight places. Probably for clamping hoses on motors or something. We also have locking clamps in the dental office where I work. They are called hemostats...much smaller though. Hmmm...need to ask my boss if I can have one. Add to my collection. LOL!!
The handle is like a scissor handle, but has a ratcheting locking system that locks the tip to hold something.
Here's a picture of the tip or nose of the clamp.
This is a long one...12 inches. (pictured compared to a pen)
Now onto the "Sewing" transformation of this tool... TURNING A FABRIC TUBE.
When you sew a fabric tube for handles on bags or anything long and narrow, boy can it be a pain turning it right side out.
Just insert the clamp nose into the narrow fabric tube until you reach the end.
When you reach the end, open up the locking handle...
grab a little of the end fabric and lock the clamp.
Pull back on the "locked in" fabric and pull through the tube.
Tah Dah!!!
I am not kidding with this...it is fabulous!! Fastest turning for me...ever.
You really need to get one. I have no affiliation with Harbor Freight, but it is a great store. I'm sure you can find this online or in an automotive store if you don't have Harbor Freight. I'm so mad, the one Harbor Freight sells on their website has cute bright red handles :( Would have match my sewing room.
Happy Turning,
~Karen~
Wow..what a great tool. MUST. FIND. ONE!!!
ReplyDeleteYou are my newest hero! This is a fabulous idea!
ReplyDeleteLOVE IT! what a great tool! husband is a fly fisherman, ties his own flies we have a stack of them and never thought to snag one. dibs on one now!
ReplyDeletepen... i laughed out loud! pretty much has been the tool of choice :)
i wanted to tell you how much i appreciate all the hard work you put into your blog.
tracie
Oh wow I could so have used one of these yesterday as I spent over an hour trying to turnout two shoestring straps for my grandaughters dress grrrr...
ReplyDeleteAm now going to hunt high and low for one of these, first stop ebay!!
I have had one of these for a few years and I love it. I originally bought it back when I used to do garment sewing and it was so great for turning facings and collars and tubes. I still use it a lot (just did tonight, in fact). I don't have a Harbor Freight but there is a local flea market that comes once a year and I bought mine there for a whole dollar. I also bought these reverse tweezers that are invaluable.
ReplyDeleteThis is one of my favorite tools in the studio. I got mine in a retreat package a couple of years ago to work on a specific quilt pattern. I think mine actually is a hemostat but same principle. With this and a "Purple Thang", I can turn and push out nice points on just about anything.
ReplyDeleteI had many pairs of hemostats from my nursing career, and I use them for quilting stuff all the time. But, the long ones will be great!! Need to make a run to Harbor Freight, I love that place. I think of you every time I go there, lol.
ReplyDeleteI've used hemostats for years, especially back when I made mohair bears. They work great for turning small teddy arms and legs, but also for stuffing. Grab a little bit of polyfill with the tip of the clamping tool and fill a muzzle area in no time. Would work great, too, for stuffing a pincushion. If you don't have a Harbor Freight store, I've seen them at quilt shows at the scissor vendors table- lots and lots of different sizes! Love your Tool Time Tuesday! Thanks for all of the great ideas.
ReplyDeleteI have sewed with a pair of hemostats for at least 10 years, but these long ones look even better!
ReplyDeleteThree nurses in this family....we like hemostats! I keep them at assorted places in the home for so many wonderful uses, including next to the sewing machine! Great tool.
ReplyDeleteLove it ! And I imagine after you turn the fabric out, you could put the 'tool' back inside, open it wide and use that to spread the fabric smooth while finger pressing in place. Great post, as always !
ReplyDeleteOh I'm going there to get one! I asked a friend of mine that is a EMT if they had any extra hemostat's once LOL Me and hubby go to Harbor Freight often so putting it on my list! (just never thought to look for that ) Thank you , you always have nice tips and tricks!
ReplyDeleteYou can also get hemostats at Walmart in the fishing section. Plus they carry the curved tip ones as well as the straight ones. Curved ones can be easier to use for making stuffed animals where body parts have a curve, not only to turn right side out, but place a bit of poly stuffing and clamp in the curved tip and then you can stuff those small hard to reach places like fingers and toes. The ones Walmart sells might not be as long as the ones you have Karen, but they can still do the job most of the time.
ReplyDeleteNext time hubby goes to Harbor Freight I am going to have him get me these... fabulous idea, thanks for sharing it! :)
ReplyDeleteI love HF - I do almost as much shopping in there as I do a fabric store (note I said "almost")
ReplyDeleteAwesome idea! This must be pinned!!!
ReplyDeleteAwesome! I definitely need one of these! I have a shorter one, but NEED the long one, LOL! My latest "favorite" is an angled (sometimes they are called "offset") screwdriver. It is AMAZING to be able to easily remove/replace the screws in my machine plate.
ReplyDeleteOMG! I am so going to get one of those! I have been making aprons for the famiy and friends and it will be so much easier to turn the straps! Thank you for the great idea!
ReplyDeleteOh how kewl. I could have used it yesterday while making neck ties and sashes for an apron! I used a large safety pin instead. I don't know where my bodkins are but I sure wish I would have had either them or the locking clamp. I am thinking I need to go cruise Harbor Freight! :)
ReplyDeleteHoly Cow! At first when I saw this I thought to myself...OK? Now what in the world would I do with something like that? But as I continued to read...using the pictures....I soon realized...I most certainly need one of these. Who knew? Man my hubby goes to Harbor Freight all the time. They do have a wealth of items that a crafter can use. And it is usually so much less expensive than the craft stores sale it for. ;) Thanks so much for the tip!
ReplyDeleteBlessings,
Betsy
They work really well for turning but they're also really useful for stuffing, especially stuffing small things. I've made several cloth dolls that are 3-5" and use clamps to get the stuffing into the ends of arms and legs as well as just that one place it needs to be to smooth out the head.
ReplyDeleteFANTASTIC!!!!
ReplyDeleteOne small problem though. With all your great ideas I'm afraid that my Husband is going to put a lock on his workshop! ;-)
Future post idea: How to pick a lock (For creative purposes of course!)
Love your ideas!
J
When i worked in a hospital, nursing, many moons ago, and things like hemostats weren't inventoried or disposable like now, I "borrowed" a pair of these and still have them. The shorter kind. This is a terrific idea even for the shorter ones. Thanks for sharing.
ReplyDeleteLove it! I'm getting one the next time I'm there. It looks like it would do a great job. Thanks
ReplyDeleteI used a version of a Fasturn turning kit growing up when my grandmother and I made a bunch (and I mean a BUNCH) of fabric hair ties. Interesting to see how this compares.
ReplyDeleteI have the shorter version hemostats but a LONG pair is just the ticket for turning long tubes! Thanks for the tip and I can't wait to go to Harbor Freight!
ReplyDeleteI am so going to get me some of those. I hate turning fabric tubes. What a great idea!!! So excited :)
ReplyDeleteThanks for the tip! Now I have to hunt down my old nursing hemostats! :)
ReplyDeleteYou amaze me with the great ideas you come up with! Thanks for the tip which will sure help out when turning those dreadful tubes. I am going to get me one of these and I pinned your idea too! Thanks!!
ReplyDeleteWhat a great idea. I have to see if my DH has one of these in his shop I can liberate. If not, then I am off to Harbor Freight.
ReplyDeleteBrilliant!! Thanks so much; I just ordered two!
ReplyDeleteOH MY GOODNESS I GOTTA have one of those! I have another thing but it's not that long but it works pretty good.
ReplyDeleteOh my goodness! That is genious! I have so many of the shorter ones from my days of nursing, I should have grabbed the longer ones! I'll be heading to Harbor Freight:)
ReplyDeleteRobin :) (formerly from fonvillefarm.blogspot.com)
SOMEONE PLEASE HELP ME!! HOW DO I SEW A FABRIC TUBE???
ReplyDelete