Tuesday, January 26, 2010

Tool Time Tuesday...Take Out

Happy Tuesday everyone!
Take Out...Woo Hoo that means food!
space
Do you remember this post...the framed magnetic board? If you haven't seen this one yet, it's a good one. Don't forget...don't buy "sheet metal", it's very expensive. Go to the roofing chimney section in the hardware store for this. It about $5.00 - $7.00 a sheet vs $40.00 and up.


space
In that post, I had to cut the 24" x 36" sheet to fit the frame...
space

space
and the piece I am cutting off on the left side below is what I had remaining. It is 4" x 24", so that's what I'm using in this week's TTT. You can definitely use any size piece of metal to fit your needs.


Well, here's where the title of "Take Out" comes in. I save way too much crap...because I am now a Tool Time Tuesday addict, lol. Nothing is out of bounds for a post and it doesn't even have to be from a hardware store. These little puppies below are take out cups from restaurants.
space
Yes, I washed them and saved them. I know...I need to be medicated, but look at the potential in them and they are free. Well, you paid for them when you bought the food, but they are free, because normal people throw them away and I (and now you) keep them.
space
The large size had duck sauce and the medium had hot mustard, both from Chinese take out. The tiny ones are from McDonald's for the ketchup...don't forget the covers!!



For this project you will also need little magnets found in any craft store.



Here are a few close ups of the sizes of the containers.







The first and only step for the cups is to hot glue the magnet dots onto the bottom of each take out cup. Done!



The next part is to get the magnetic board ready. If you have already made the larger framed piece, you can use the cups with that. You can also cut the metal into different sizes to fit an 8" x 10" frame or an 11" x 14" frame if you want to keep it by your craft area or desk.
space
These next few steps are if you are using the scrap pieces or if you are not using it in a frame. The metal can be flimsy and curls up on the ends, so it needs a backing.


Well, how about these little freebies from the paint section. These are paint sticks. Remember this post when I used them in another TTT.



Mark one of them for a hole where the nail will go into if you are hanging it on the wall.



Here's the drilled hole.



You will need to glue the wooden sticks to the back of the metal...hot glue doesn't work on metal, it pops off. I used this and boy does it work. It just takes a while to dry. Any glue for metal will work, just follow the directions on the box.



This is the back after the glue had dried. That stuff spreads out, so if you want the back to look neat, don't put too much.



That's what it looks like dried. Looks gross, but who's going to see it.



It takes a lot of pictures just to say...glue magnets to the back of the cups and glue sticks to the back of the metal, but that's a tutorial for ya!!
space
Now the fun part. You can fill those little cups up with anything. How about all your embellishments...beads, buttons and yes those are eye balls. You'll see those in tomorrow's post.



Just hang your metal on the wall and stick the little magnetic cups on. That edge of the metal looks rough from where I cut it, but I sanded it down.



You can also fill it with office supplies...



and use it over your desk.



See it under the frame?



Too cute!!



Easy to grab and find things. The covers are clear so you can see what's inside.






Because I mounted this horizontally and I forgot to put 2 holes in the sticks for the nails, I used my favorite mounting stickers from the 3M Command hooks.




Other places and things to put in the cups:
  • inside a kitchen cabinet to hold spices
  • use a cookie sheet for the metal and it can sit on your counter on a plate stand and the cups can hold cake decorating sprinkles and colored sugars or spices again
  • they can hold all the different sizes of safety pins
  • all the different presser feet for your sewing machine
  • scrap booking doo dads (this one is for you Sarah B.)
  • earrings, rings
  • how about stick them to your refrigerator...great for spices again or great for your child's lunch money for school or a little snack cup of M&M's as a reward for a good deed. Just keep them on the refrigerator and they are ready to grab.
  • stick them to your file cabinets at work
  • how about in your husband's work shop to hold screws and nails
  • and the list could go on and on to fit your own needs

Just remember to think outside the box.

One more tip...if you are putting in something heavy, remember to purchase stronger magnets or the weight in the cup will just pull it off the metal.

Have a great Tuesday and stop back tomorrow...I have a couple TTT updates from some previous posts.

~Karen~

32 comments:

  1. Great idea! I too save these little cups. Mine come from Taco Bueno! I use them for paint or water cups when my kiddos want to craft.

    ReplyDelete
  2. What a GREAT idea....you are TOO much, Karen!!!

    ReplyDelete
  3. You're clever and I like what you did with it all. Great ideas :)

    ReplyDelete
  4. Absolutely awesome idea. could put a magnet on the board just to hold a pen too.
    I have a hard time entering your blog Karen, and wonder if it's just me. It is always locking up and sometimes I can't post. I'm there though.
    See you tomorrow

    ReplyDelete
  5. Wonderful idea(s). Thank you for another awesome tutorial.

    ReplyDelete
  6. Cool! We have downsized from house to RV, and I'm always looking for ways to make organizing my quilt/sewing/craft things easier! Thanks for the inspiration! :)

    ReplyDelete
  7. This is BRILLIANT! Of course, now I just have to find a spot of wall in my studio that isn't covered with bookshelves. :)

    ReplyDelete
  8. Karen, I believe you have one of the most creative minds out there.
    I just love all of your ideas.

    ReplyDelete
  9. I love that you share your craft ideas with us! Ingenious!!

    ReplyDelete
  10. Oh Karen that's so clever! Way to recycle too. Great idea. Jenn

    ReplyDelete
  11. Karen - you come up with the most amazing ideas. Every week, I look forward to Tuesday, just so I can see what else you have up your sleeve. Keep 'em coming!!!

    ReplyDelete
  12. Thats one way to use up that metal..huh. Karen that is using
    good ingenuity..That would come
    in handy especially around your
    sewing machine. Thanks for the
    idea."KEEPIN COMIN".:o)

    ReplyDelete
  13. Great idea! I love it! So industrial looking too...will be great for my son's dorm room this fall! :)

    Debbie
    ouroldhomestead.blogspot.com

    ReplyDelete
  14. Very clever...I love the framed metal notice board...now lets go see what DH has in his shed..
    Thank you Julia ♥

    ReplyDelete
  15. love this idea - I liked the framed silver board - but this just makes it.

    oh, and I have been looking to "buy" the magnetic spice containers for the INSIDE of my cabnet - now I have a much better plan!

    Thanks again!

    ReplyDelete
  16. That is very clever and I can imagine, another thing my cats would find ways to pull apart;)

    Debbie

    ReplyDelete
  17. What a great idea, and it looks so decorative!

    ReplyDelete
  18. This reminds me of something my dad did when I was younger - he took baby food jars, nailed the lids to a board and hung the board from the ceiling/underside of his workbench shelf. He'd then screw the baby food jars into the board - of course they had to be hanging from the lids, as opposed to sideways like your takeout containers. But it was a similar concept. I like your idea.

    ReplyDelete
  19. you have to publish a book with all these Tool Time Tuesday's how too's in it........

    Well done!!

    Gill in Canada

    ReplyDelete
  20. Genius! What a great thrifty idea! They look great.

    ReplyDelete
  21. Great idea and so inexpensive. It can be used in so many places for so many things. Thanks for linking to We're Organized Wednesday. Hope to see your again next week.

    ReplyDelete
  22. This is amazing! This is the first time at your blog and I am SO impressed by all your creative ideas. Thanks so much. I am just now putting together a sewing/craft room in my basement and it needs a lot of work and TLC. I will definitely be using many of your ideas and coming back for more!! You are a GEM!!

    ReplyDelete
  23. You could also use magnets on the old 35mm film containers but they are not see through.

    ReplyDelete
  24. I save mechanical pencil lead containers to organize my sewing needles. I have several shapes & sizes, but for this, the flat, rectangular ones would work best with a small thin 'high-power' magnet attached (which I've saved over the years, as well). I'm also working on a project to display my son's artwork, and your idea could incorporate into that quite well. Project #9,999 coming up! Ain't it grand? ;D

    ReplyDelete
  25. Love galvanized metal!!!! I'm looking to mount it in a chunky frame made from scraps, mount a drawer slide in my spice cabinet. Create 'magnetic spice tins', and have my spices easy to find, on pull out sheets. Just need to motivate !

    ReplyDelete
  26. I use the clear plastic baby food containers! Actually glue letters to the inside of the lids and let the kids spell words and practice their spelling lists on the magnet board. Fun for them...cheap for me!

    ReplyDelete
  27. A recycling idea to go along with this project...I have always saved old plastic shower curtain liners. I cut out the magnets at the bottom for projects like this. I use the cleaned curtain for a painting drop cloth. Win - Win!

    ReplyDelete

Thanks so much for taking the time to leave a comment...I just love hearing from you!

Related Posts Plugin for WordPress, Blogger...

LinkWithin

Related Posts with Thumbnails